Fan Heater; Maintenance - DeLonghi KENDRA ELETTRICO ANTRACITE Bedienungsanleitung

chILDREN SaFETy
To activate the function, press the "+" and "-"
buttons together and hold them both down
until the icon
To deactivate the function, repeat the same
operation.
"Children Safety" can be activated in all operating modes,
including "Overdrive (2h)". The function cannot be activated
when the appliance is in "Standby".
KEyPaD LOcK
It is possible to lock the remote control keypad to avoid acci-
dental modifications.
To activate the function, press the "Mode"
and "+" buttons together and hold them both
EN
down until the icon
play.
To unlock the keypad, press the same two buttons together
as before.
The "Keypad Lock" icon will no longer appear on the LCD.
ImPORTaNT:
The "Keypad Lock" function does not inhibit the
"Standby" button. This is therefore always active,
even when the "Keypad Lock" function is enabled.

FaN hEaTER

The "Fan Heater" function is only available on the radiators
equipped with fan heater.
It is not available on this product.
If the "Fan Heater" is pressed, the appliance confirms the
command reception but it does not modify its current state.
ATTENTION:
If the batteries are flat, the "batt" warning appears
on the display of the remote control.
iMPorTAnT: In case of power down due to a black-out, all
the current settings are kept in memory for about 1 hour
and a half. At recovery from power down after 1 hour and a
half, the appliance goes to the previously selected operating
appears on the display.
appears on the dis-
mode, loosing the hour and day of the week.
If the power down happens when the radiator is in "Chrono"
mode and the recovery takes place after 1 hour and a half,
the appliance goes to "Comfort" mode with temperature set
point 17 °C.
The user settings will be restored as soon as the first com-
mand (if provided) is sent from the RCU.
ImPORTaNT: If the appliance remains without power
while the "Overdrive (2h)" function is enabled, the time re-
maining until the end of the two hour period is retained for
about one and a half hours. After this time, when power is
restored the date and time settings are lost. The appliance
exits the function and operates in the mode selected pre-
viously.
5. cLEaNING
Before cleaning, make sure the appliance is turned
off, cold and disconnected from the household
mains.
To clean, just wipe with a soft damp cloth and
neutral detergent. Never use abrasive or corrosive
cleaning products or solvents.
To maintain efficiency, remove the dust from the
surface and inside of the appliance at least twice a
year using a vacuum cleaner.

6. maINTENaNcE

Should any technical problems arise, contact a
qualified professional (recognised or authorised by
the dealer or manufacturer) or your local dealer.
All operations on the appliance must be carried
out by a qualified professional who before per-
forming maintenance must make sure the appli-
ance is turned off, cold and disconnected from the
household mains.
54