Removing The Shoulder Support Covers; Removing The Seat Covers; Impact Shield Cover / Toy Figures; Replacing The Covers - KIDDY comfort pro Bedienungsanleitung

ENG

8.2 Removing the shoulder support covers

Slide the adjustable headrest down to the lowest position. Unsnap the
buttons on the back sides of the shoulder supports. Now you can pull the
covers off the shoulder supports from the bottom to the top.

8.3 Removing the seat covers

The cover for the thigh support is fastened with an elastic band. You can
remove it by pulling up on it carefully.
To be able to remove the seat cover, open the lock on the underside of the
seat. Then undo the ties and Velcro fasteners under the thigh support.
Pull the straps between the seatback and seat up. Now the seat cover can
be removed.

8.4 Impact shield cover / toy figures

The impact shield cover may not be removed or washed.
Please consult your dealer or manufacturer if the body shield or its cover is
damaged.
The toy figures can be removed by unsnapping the buttons on the retainer
strap.

8.5 Replacing the covers

To replace the covers, follow the steps for removing the covers in reverse
order (see Sections 8.1 – 8.3).
16