Switching The Power Function On And Off - AEG 88032K-MN Benutzerinformation

28
Operating the appliance
Step
The child safety device is switched off.
The child safety device can only be switched on and off if no heat setting is set.
Overriding the child safety device
The child safety device can be switched off in this way for a single cooking session; it remains
activated afterwards.
Step
1.
2.
Touch
Until the appliance is next switched off, it can used as normal. After switching off the appliance,
the child safety device is active again.
After overriding the child safety device, a heat setting or a function must be set within
approx. 10 seconds, otherwise the appliance automatically switches itself off.

Switching the power function on and off

The power function
bring a large quantity of water to the boil quickly. The power function is activated for 8
minutes at most. After that the induction cooking zone automatically switches back to heat
setting .
To switch on
To switch off
Power Management
The cooking zones of the cooking surface have a
maximum power.
The maximum power is reached when the heat
setting 14 has been set for all cooking zones.
Two cooking zones generate a pair (see figure)
and therefore, the power management shares the
maximum available power between these cook-
ing zones.
When the power function is selected for one
cooking zone, the power management makes the
additional power for this cooking zone available
by reducing the power of the corresponding oth-
er cooking zone.
Example: the heat setting 14 is selected on one cooking zone. The power function is
switched on for the corresponding cooking zone. The power function is carried out but the
heat setting 14 of one of the cooking zones and the power function for the other cooking
Control panel
Control panel
Switch appliance on
for 4 seconds
makes more power available to the induction cooking zones, e.g. to
Touch
Touch a heat setting
Control panel
Display/Signal
Display/Signal
lights up
Display
/