Velleman ANTDVBT Bedienungsanleitung

ANTDVBT – ACTIVE INDOOR AERIAL FOR DVB-T RECEPTION
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialised
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
As safety, security and usage requirements vary according to the country or area of buy, please contact
your local authorities for an installation and use complying with local requirements.
Thank you for buying the ANTDVBT! Please read the manual thoroughly before bringing this device into service. If the
device was damaged in transit, don't install or use it and contact your dealer.
2. Description
3. Technical Specifications
Power Supply
Frequency Range
Amplification
Dimensions
Total Weight
The information in this manual is subject to change without prior notice.
ANTDVBT
5 – 15VDC via your DVB receiver (through coaxial cable) or optional
adapter
100 – 860MHz
20dB (adjustable)
220 x 80 x 150mm
380g
- 1 -
1. ON/OFF switch and amplification control
(turn the wheel until you hear a clicking
sound to switch on, turn more to amplify
the signal, unfold and direct the aerial if
necessary)
2. power supply input for optional power
adapter
3. aerial
4. coaxial cable to DVB receiver
VELLEMAN