Product Label; Product Symbols - human care Diana II MLA 90555 Gebrauchsanweisung

Diana II

Product label

The product label contains information about
the lift and is located on the right-hand side,
close to the mast.
In compliance with / Standards / CE
Human Care is an ISO 13485:2016 Swedish
certified medical device company . The Quality
Management System is in compliance with US
21 CFR part 820.
The product has a CE marking in accordance
with the Medical Device Directive 93/42/
EEC and/or Medical Device Regulation (EU)
2017/745). The CE mark label is at the product.
This product has been tested by an accred-
ited test institution and meets the following
necessary medical requirements: EN 10535, EN
60601-1 (electrical safety) and EN 60601-1-2
(EMC). This product carries the CE marking.

Product symbols

Symbols on the product and the product label:
Product operating cycle
CE marking
MD Medical Device
Product manufacturer
Maximum working load
14 www.humancaregroup.com
For indoor use
User manual: Please read the manual
to familiarize yourself with its contents
before using the product
This product contains electrical and elec-
tronic components and must be recycled
according to local guidelines.
Electric shock protection class II
Product type B: approved for physical
contact with clients (IEC 60601-1)