Assembling Appliances In Banks - Angelo Po 0G0FT1E Bedien- Und Installationshandbuch

ASSEMBLING APPLIANCES IN BANKS

To assemble appliances in banks (side by side)
proceed as described below.
1 - Pull off the knob (A).
2 - Undo the screws and remove the control
panels (B).
3 - Apply masking tape to the edges to be placed
side by side.
4 - Apply food-approved sealant to the edges to be
placed side by side.
5 - Place the appliances side by side.
6 - Connect the appliance using the screws and
nuts (C-D).
7 - Remove the excess sealant and the masking
tape.
8 - Apply the sealant to the inside of the lid (E), and
fit it to cover the fixing zone.
9 - Replace the control panels (B) and the knobs (A)
on completion of the operation.
A variety of optional installation kits are available for
arranging appliances in banks:
D)"Over cupboard" installation kit
E)"Bridge" installation kit
D
A
B
C
- 13 -
E
D
E
IT
GB
DE
FR
ES
English