Bs Default; Time; Set Alarm - Silvercrest SDT 1.7 A3 - IAN 279401 Bedienungsanleitung

SilverCrest SDT 1.7 A3

Enter the phone's old PIN code (default 0000) and press the Phonebook button [3] to
confirm.

"New PIN:" will appear on the display [2]. Enter a new PIN code for your phone and
press the Phonebook button [3] to confirm.

"Again:" will appear on the display [2]. Enter the new PIN code again and press the
Phonebook button [3] to confirm.

A confirmation beep can be heard.

Please make sure you remember the System PIN or keep it in a safe place.
In case that you have lost your PIN, please contact our Service Hotline (see page 99).

BS Default

This lets you restore the base to its factory settings. To do so, you must enter the 4-digit PIN (default
0000). Press the Phonebook button [3] to confirm your entry. However, the system PIN will not be
reset.

Time

This menu lets you set alarm and the date and time as well as the clock format. Proceed as follows
to open this menu:

While the handset is in standby mode, press the Menu button [12] to show the menu.

Press the  or  buttons on the directional control [4] to select the "Time" menu.

Press the Phonebook button [3] to confirm your selection.

Press  or  on the directional control [4] to select the desired menu item and then
press the Phonebook button [3] to confirm.

Set Alarm

For each alarm (Once, Every Day, Mon to Fri) you can set the time and the melody. To disable the
alarm, select "Off".

Input the time via the numeric buttons [6]. Press the Phonebook button [3] to save.

Select a melody. Press the Phonebook button [3] to save.

An alarm icon appears on the display [2] while the alarm is enabled.
The handset will play the selected melody at the time of the set alarm. Press the Menu
button [12] to stop the alarm sound. Press the Phonebook button [3] for snooze. After
approx. 5 minutes the melody will play.
86 - English