Bosch Rexroth Simulator PRC 7000 Betriebsanleitung Seite 251

R911344640 / 01 | Simulator PRC7000
Abbreviation Meaning
TCP Transmission Control Protocol.
TCP controls the way in which data is exchanged between
computers. It is a link-oriented, packet-switching transport
protocol and belongs to the range of Internet protocols
(IP).
Temp. Temperature.
Tool tip Explanatory text.
Appears when the mouse pointer remains on an input
field/object for a moment.
ÜK Monitoring contact
e.g. for monitoring the pressure inside the cylinder (that
closes the electrodes) or monitoring of the electrode posi­
tion (e.g. "gun closed")
UIP Process quality.
UIR UI control
UST Upslope time
Time in which the %I increases from the beginning of the
MainWLD.
WC Weld complete contact.
This signal is output when the schedule has been com­
pleted.
WIC Weld interface controller
WLD Weld time
A distinction is made between PreWLD (pre-heating time
or 1.WLD), MainWLD (main weld time or 2.WLD), and
PstWLD (post-heating time or 3.WLD).
All 3 weld times can be programmed separately in terms of
duration and %I.
Impulses and slope values can only be programmed for
the MainWLD.
WT Weld timer.
Weld timer, also referred to as resistance weld timer or
simply as timer.
Bosch Rexroth AG 251 / 256
Abbreviations