Explanations Of Symbols; Unpacking; Safety Instructions - IKA C 6030 Betriebsanleitung

Contents
Page
Contens 5

Explanations of symbols

5

Safety instructions

5

Unpacking

5
Setting up of the instrument 6
Explanations of symbols
This symbol identifies information which is of absolute
DANGER
importance for the safety of your health. Non-
compliance may lead to impairments to health and injury.
This symbol identifies information which is important for
WARNING
proper operation and handling of the decomposition
vessel. Non-compliance may result in imprecise measure-
ments or damage to the venting station.
Safety instructions
The C6030 venting station is used for controlled venting
DANGER
of IKA decomposition vessels C6010 and C6012 in
conjunction with the IKA C6000 calorimeter system in the
"decomposition" operating mode.
The venting speed may be infinitely adjusted via a throttle valve by using a
manual adjusting screw. Please note that the throttle valve is closed at the
beginning of the venting operation.
C 6030_082014
EN
Page
Function 7
Maintenance and cleaning 8
Fault table 8
Warranty 8
Spare part list 14
Spare parts 15
Do not operate without the ground clamp included in the delivery quantity!
The maximum permitted operating pressure is 40 bar (at the vent header (f)).
Please observe the general laboratory guidelines when handling glass vessels.
Unpacking
• Unpacking
- Please unpack the device carefully
- In the case of any damage a report must be sent immediately
(post, rail or forwarder).
c
• Delivery quantity
f
a) Base plate
b) Gas washing bottle
c) GL screw joint
d) Pressure tubing
e) Drainage hose
f) Venting head
g) Fork spanner
h) Set of O-Rings
i) Operating instructions
d
b
a
e
5