Adjusting Interpupillary Distance; Use Of Eyeshields; Selecting The Light Path - Optika IM Serie Bedienungsanleitung

9.5

Adjusting interpupillary distance

Observing with both eyes, hold the two eyepiece prism as-
semblies. Rotate them around their common axis until the
fields of view match.
• The graduation on the interpupillary distance indi-
cator ①, pointed by the spot "." on the eyepiece
holder, shows the distance between the operator's
eyes. (Fig. 35)
The range of the interpupillary distance is 48-75mm.
9.6

Use of eyeshields

• Use with eyeglasses
Fold rubber eyeshields with both hands. Folded eyeshields
avoid scratching the lenses of eyeglasses. (Fig. 36)
• Use without eyeglasses
Raise eye shields and observe at the microscope placing
eyes to the shields, avoiding external light to disturb the
observation. (Fig. 37)
9.7

Selecting the light path

Pull the light path selector lever ② sideways using your
thumb, selecting the light path you need. (Fig. 38)
①
Page 28
F ig. 35 F ig. 35
F ig. 36 F ig. 36
F ig. 37 F ig. 37
②
F ig. 38 F ig. 38