Klarstein FULL HOUSE DOWN AIR Handbuch Seite 68

EN
68
Pause Function
Make sure the cooktop is turned on. Note: you can use the Pause
function, provide you're not selecting any cooking zone. Touch
timer control (just one time), the timer indicator will start flashing
and "PU" will show in the timer display.
When the Pause function is set, the automatic 10
minutes will begin to count down immediately.
The timer indicator will stay shows the [PU].
When the automatic 10 minutes finished, buzzer
will beep 5 times and the timer indicator still
shows [PU] and the power level indicator will
flash. Touch the heating zone selection control
that you want to turn the heating elements back
on, simply press the required zone, the return
work zone will stop flash. The timer indicator still
shows [PU], the zone will work at next Pause
function.
If you want to cancel Pause function, any cooking zones are not
selected, touch the timer control button (just one time) first, an
indicator next to the key will show [--]. The heating zone will go
back to work at normal working situation.
Default working times
Auto shut down is a safety protection function for your induction hob. It shut down
automatically if ever you forget to turn off your cooking. The default working times for
various power levels are shown in the below table:
Power level Keep warm
Working timer
8
(hours)
When the pot is removed, the induction hob can stop heating immediately and the hob
automatically switch off after 2 minutes.
1 2 3 4 5
8 8 8 4 4
6 7 8 9
4 2 2 2