Cable Options / Kabeloptionen; Assembly / Montage; Technical Details / Technische Details - Sigma EOX REMOTE 500 Technische Dokumentation

3.3. Cable options / Kabeloptionen

10
cm
35
cm

3.4. Assembly / Montage

− Loosen the screw (Allen Key, 3mm) of EOX
− Bend the elastic clamp around the handlebar
− Position V1200 in area of view
− Tighten the screw of EOX
(for tightening force see table below)
− Connect the plug of V1200 with the plug of the
e-system
− Assemble R500 and connect with V1200
(see chapter 2.4)
Butler
Out-front
Reverse
Reverse

3.5. Technical details / Technische Details

Specifications
Color (housing)
Material
Weight
Mounting options
Handlebar diameter
Communication interfaces
FW update
Usability
butler
®
® butler
Handlebar diameter
31.8 mm
31.8 mm
35.0 mm
Anthracite
PC+GF (Housing),
PC+PMMA (Lens),
PA+GF (Butler), TPU (Pad)
62.7 g
Out-front, Reverse
31.8 mm, 35.0 mm
UART
via EOX ® REMOTE 500
only with EOX ® REMOTE 500
10
cm
− Schraube (Innensechskant, 3mm) des EOX
lösen
− Elastische Schelle langsam aufbiegen und um den
Lenker führen
− V1200 im Sichtfeld positionieren
− Schraube des EOX
®
(Anzugsdrehmoment siehe unten)
− Stecker des V1200 mit dem Stecker des E-Systems
verbinden
− R500 montieren und mit V1200 verbinden
(siehe Kapitel 2.4)
Tightening force
0.5 +/- 0.1 Nm
0.5 +/- 0.1 Nm
0.8 +/- 0.1 Nm
Power supply
Operating voltage
Operating power
consumption
Display
Backlight
Sensors
Operating temperature
Storage temperature
Protection level
Certification
Halters
®
Halters festziehen
by E-Bike
6 / 12 / 18 V (min / typ / max)
< 50 mA
Type: FSTN, Positive,
Transflective;
Resolution: Segmented with
22 x 59 px dot block (h x w);
View angle: 6 o' clock
(always on)

Temperature
-20 / 25 / 70 °C (min / typ / max)
-20 / 25 / 80 °C (min / typ / max)
IPX6, IPX7
CE, FCC, ROHS, REACH