en Familiarising yourself with your appliance
4.3 Setting up appliance
WARNING
Risk of fire!
Intense heat may cause the appli-
ance and other parts to catch fire.
Never place the appliance on or
▶
near hot surfaces.
ATTENTION!
During operation warm exhaust air
escapes from the vent grille at the
rear. If this is blocked, it may cause
the appliance to overheat.
Set up the appliance at a sufficient
▶
distance from walls, easily dam-
aged surfaces and other appli-
ances.
Vibrations may impair functioning of
the appliance.
Do not place the appliance on
▶
moving or vibrating surfaces.
Place the appliance on a stable,
1.
level, clean and flat work surface.
Pull the power cable out to the re-
2.
quired length.
→ "Cable length", Page 40
Do not insert the mains plug.
Familiarising yourself with your appliance
5 Familiarising yourself
with your appliance
Familiarising yourself with your appliance
5.1 Appliance
You can find an overview of the parts
of your appliance here.
→ Fig.
2
Stainless steel mixing bowl
1
Control panel
2
Lid with integrated filling shaft
3
Release button for swivel arm
4
36
Swivel arm
5
Rotary switch
6
Protective cover for drive 2
8
Drive 2
9
Protective cover for drive 3
10
Drive 3
11
Vent grille
12
Main drive
13
Cord store
14
5.2 Rotary switch
The rotary switch is used to start and
stop processing and select the
speed.
Symbol Function
Stop processing.
Process ingredients at low
speed.
Process ingredients at
maximum speed.
Process ingredients briefly
at maximum speed.
→ "Using instantaneous
switching", Page 42
5.3 Illuminated ring
The illuminated ring on the rotary
switch informs you about the operat-
ing status of your appliance.
Display
The illuminated
ring lights up and
processing is un-
derway.
Status
The appliance is
functioning per-
fectly.