Design And Function; Description; Scope Of Delivery; Base Unit - WIKA CPP1200-X Betriebsanleitung

4. Design and function

4. Design and function

4.1 Description

The model CPP1200-X hydraulic comparison test pump features optimal characteristics
for use in the laboratory, as well as the ruggedness needed for industrial applications. It
is suitable for pressure generation up to 1,200 bar.
Test item and reference measuring instrument are connected to the two test
connections.

4.2 Scope of delivery

Instrument base
■
Dual-area spindle pump for filling, pressure generation and fine pressure adjustment
■
2 test connections with G ½ female thread, loose union connection
■
Adapter set for test item connection selectable from 3 different sets:
■
- Set of adapters "BSP" G ½ male on G ⅛, G ¼, G ⅜ and G ½ female
- Set of adapters "NPT" G ½ male on ⅛ NPT, ¼ NPT, ⅜ NPT and ½ NPT female
- Set of adapters "metric" G ½ male on M12 x 1.5 and M20 x 1.5 female
VG22 mineral oil (0.5 litre)
■
Tool and maintenance set consisting of:
■
1 hexagon wrench key 3 mm A/F
2 x 30 mm A/F open-ended spanners
1 spirit level
4 level plates
1 bag of seals
1 pointer punch
1 pointer remover
1 test item connection
Operating instructions in German and English language
■
Cross-check scope of delivery with delivery note.

4.3 Base unit

The model CPP1200-X base unit consists of a solid aluminium base plate mounted
on four adjustable levelling feet, a spindle pump, reservoir, control valves, pipework to
two stainless steel pressure connection blocks. The pipework and above mentioned
assemblies are covered by an easy to clean ABS cover.
The component identification numbers in brackets in each procedure refer to the
following figure.
WIKA operating instructions model CPP1200-X
EN
17