ASSEMBLING THE JUICER
Assembling the Juicer parts
Before First Use
Before using your Juicer for the first time, wipe Juicer parts with a warm damp cloth, then
wipe clean with a damp cloth. Do not wash the gear housing assembly. Dry with a soft
cloth. See "Care and Cleaning" section.
Slide the pulp chute onto the bottom of
1
the bowl.
Place the bowl into the drive assembly.
3
Alignment
marks
Place the screen of your choice into the
5
screen wiper basket with the alignment
marks directly above the pulp chute.
W10631037A_Env1.indd 9
Pulp chute
2
4
6
Slide the gasket into place behind
the pulp chute.
Put the screen wiper basket into
the bowl.
Place the auger/blade assembly inside
the screen.
9
5/6/14 1:44 PM