ASSEMBLING THE JUICER
Attaching the Juicer assembly to the Stand Mixer
Turn Stand Mixer OFF and unplug.
1
For Stand Mixers with a hinged attachment hub cover: Flip up to open.
2
For Stand Mixers with a removable attachment hub cover: Turn the attachment knob
counterclockwise to remove attachment hub cover.
Insert the juicer into the attachment
3
hub. Rotate attachment back and forth
if necessary. The pin on the attachment
housing will fit into the notch of the hub
rim when in proper position.
10
W10631037A_Env1.indd 10
Tighten attachment knob until the Juicer
4
attachment is completely secured
to Stand Mixer.
A
O
5/6/14 1:44 PM