hanseatic HEKS17754GEW Gebrauchsanleitung Seite 67

13. Loosen the screws (37) and slide the
two side angle brackets (38) such that
they touch the built-in cabinet.
(33)
14. Use two long screws (33) to secure each
of the side angle brackets (38).
(34)
(33)
(35)
15. Once the doors can open and close
correctly, screw the refrigerator to the
built-in cabinet. To do so, use four short
screws (34) at the top and the two long
screws (33) at the bottom.
After the long screws (33) are driven,
cover them with the screw covers (35).
(37) (38)
(38)
(34)
(35)
Installation in a kitchen unit
(32)
16. Reattach the covers (32) in the cover
panel.
(38)
17. Put the covers (31) over the side angle
brackets (38).
(36)
18. With the appliance doors open, press
the sealing strip (36) into the gap be-
tween the refrigerator and the built-in
cabinet.
Installation is now complete.
Page EN-31
(31)