Battery Charging - Albrecht Tectalk Duro Bedienungsanleitung

Battery Charging

To charge your radio, carefully follow these instructions:
1.) Connect the power adaptor to the mains power supply and
connect the adaptor charger jack to the charging cradle.
2.) Disconnect any radio accessories and ensure the radio is
switched off.
3.) Insert the radio into the charging cradle until it 'Clicks' home. The
charger LED will glow red and charging will start. If the charger LED
blinks red or green or the charger LED does not light, re-insert the
radio into the charging cradle.
4.) The battery charging time is about 4~5 hours. When the battery is
fully charged the green LED (Full) will be turned on.
charging slot battery
charging slot radio
Power Adaptor
- Input: 230VAC
- Output: 12VDC 1Ah
28
battery
English
Tectalk Duro
radio