Troubleshooting - Prozis Skind Handbuch

EN
move the device from the middle to either side of your
face. For the nose area, move the device up and down
both sides of your nose. When cleansing your cheeks,
move the device from bottom to top, lifting the face
lines. It is easier to remove impurities when moving the
device in the opposite direction of the pores.
4. Cleanse for 1 minute, rinse and dry your face, and then
use skin care products as needed.
5. Select Heating or Non-heating mode according to air
temperature, and then gently press the areas where
wrinkles are more prone to appear, such as between
the eyebrows, around the eyes and over nasolabial
folds.
6. When cleaning the device, you can rinse it directly
under water. Then wipe the surface with a clean cloth or
allow it to air dry.
NOTE: For safety reasons, the device will work for 6
minutes and then stop.

Troubleshooting

Some issues that may arise can be solved by the user. If the
problem persists after having tried the following solutions,
please contact Prozis customer service.
12