Installation And Operation - Klarstein Skyscraper Frost Handbuch

INSTALLATION AND OPERATION

Operation method of function buttons
As light-touch buttons, lightly touch buttons on operation panel to trigger corresponding
functions.
1. The buzzer gives Bi Bi during first power-on to enter standby mode and all function
indicator lights are OFF. Except ON/OFF button, other buttons are invalid.
2. ON/OFF button: in standby mode, press this button to enable complete machine
and light power indicator light and temperature indicator light, and show current
temperature on nixie tube. During first power-on, the wind is natural and at low
speed. If restarted after power-off, memorize the mode before power-off, rather
than timing function. If it's sleep wind before power-off, turn to natural wind without
memorizing sleep wind mode.
In power-on mode, the brightness of all LED lights reduces to 30% without
operation of buttons (including remote control) for 1min, and resumes by re-
pressing the button, and corresponding operations are made.
In power-on mode, press this button to shutdown and the buzzer gives a sound of
"Bi-". Upon shutdown, the system returns to standby mode and has no output or
display.
3. Wind speed button: in power-on mode, press this button to adjust the wind
speed to circulate among low-gear wind → medium-gear wind → high-gear
wind → low-gear wind.... Wind speed indicator light on the top panel is lighted
according to current wind speed. For wind speed indicator light on the front panel,
two LEDs are lighted for each gear, and accumulated. If high-gear is enabled, all
wind speed indicator lights are on.
4. Swing button: in power-on mode, press this button to switch horizontal swing
function, and display operation conditions by LED indicator lights on top panel
and front panel.
5. Timing button: in power-on mode, press this button to set timing in 1-7H with
progressive increase of 1h by each pressing. If re-press timing button upon
7h, return to non-timing mode, in the same way. Nixie tube and LED give
corresponding changes. After timing, nixie tube displays timing time and current
temperature alternatively at an interval of 10s. If restarted after power-off, there is
no memory and internal vibration used by IC has a timing accuracy of ±3%.
6. Humidification/cooling button: in power-on mode, press this button to turn on
and off humidification function and display operation conditions by LED indicator
lights on top panel and front panel. If place frozen curling in the water tank to
cool the water (or add cold water to water tank), it has cooling effect during
humidification.
EN
21