Power On Setup; Factory Default; Possible Recording Time - ABUS Security-Center EYSEO Eytron TV8465 Benutzerhandbuch

7.7. POWER ON SETUP

LANGUAGE Here you can set the OSD menu language.
COMPOSITE If you connect a camera the DVR automatically detects the video signal
and the same video mode will be set at the AV output. If no camera is
connected you can change here the video mode.
R/C FUNC Here you can (de-)activate the remote control function.
If the function is activated and the DVR turned off, the DVR still will draw
power from the main device.
R/C ID Here you can set the ID of the remote control.
R/C SYNC Here you can start the remote control recognition (Please see chapter 9)

7.8. FACTORY DEFAULT

Here you can reset all settings to factory default.

8. Possible recording time

Resolution
640 x 480
320 x 240
This information is based on continuous recording.
All manuals and user guides at all-guides.com
POWER ON SETUP
LANGUAGE
COMPOSITE
R/C FUNC
R/C ID
R/C SYNC
FACTORY DEFAULT
RECALL DEFAULT NOW?
NO: EXIT YES: ENTER
Frame rate SD-Card
12 FPS 1 GB
30 FPS 1 GB
37
: ENGLISH
: PAL
: OFF
: 000
: STOP
High MEDIUM
155 min 280 min
150 min 380 min
LOW
340 min
600 min