Falcon EasyFind S4 Serie Benutzerhandbuch Seite 9

Easy Find Feature For Easy-Find Enabled Satellite Dish
If connecting to a Satellite dish with an Easy-Find LNB, the TV features an EasyFind feature than enables
the LED indicator on the LNB to assist in aligning the dish by allowing the dish to flash between red,
flashing red / green, and green solid depending on the strength and quality of signal. This helps be
providing an easy visual display of the accuracy of the dishes positioning.
No satellite found Satellite found
To enable this feature on the TV , ensure the TV input source is set to Satellite, then press the MENU
button on your remote.
On the CHANNEL menu section, navigate to DVB-S Manual Tuning and press OK on the remote.
Then ensure the required satellite is selected, if not then highlight the use the ◄ / ► navigation
buttons on the remote to select the required Satellite. Then nagivate to the Easy Find Setting and select
On / Off using the ◄ / ► navigation buttons.
Once the Easy Find Setting is enabled, move the dish until the goes from flashing Red and Green to a
Solid Green state. Ensure to heck elevation and signal strengh on the TV to fine tune. Once alignment
is correct, disable the function in the menu.