Falcon EasyFind S4 Serie Benutzerhandbuch Seite 10

DVB-C - Cable (Standard Cable TV connection)
Tuning the TV can either be accessed as part of the First Time Installation, from the CHANNEL menu
Auto tuning option, acessed by pressing the MENU button on the remote control.
For DVB-T2 tuning, Select Cable from the Connection type using the ◄ / ► navigation buttons on the
remote control.
Tune types available: DTV, DTV + ATV & ATV. ATV is an older analogue signal, it is available but it is
recommended to choose DTV to scan only digital channels. Choose the tune type using the ◄ / ►
navigation buttons and press OK on the remote to confirm.
Scan mode
Choose the Scan Mode (Network Scan / Full) using the ◄ / ► navigation buttons and press OK on
the remote to confirm. For a Network scan the fequency and / network id will be required.
When the scan reaches 100 %, the TV will enter viewing mode.