Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell LS 103 Ec Originalbetriebsanleitung

2.3 Technical data

Universal motor, radio and TV interference suppressed
Input power continuous operation
Current at nominal load
Idling speed
Mortising depth
Mortising depth with guide support stand FG 150, order No. 200
980
Weight without mains cable LS 103 Ec
Weight guide support stand FG 150, order No. 200 980

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1:
Idling
Machining
Workpiece: Spruce 160 x 160 x 4000 mm (6 ¼ x 6 ¼ x 157 ½ in.)
Mortising chain set: 28 x 40 x 100 mm (1 1/8 x 1 9/16 x 3 15/16 in.)
Operating sequence: Mortising of mortises in transverse direction 100 mm (3 15/16 in.) deep.
The values stated are emission levels. Although there is a correlation between emission and imission level, it
cannot be reliably derived from this whether additional precautions are necessary. Factors influencing the
current immission level existing at the workplace comprise the duration of exposure, the room characteristic,
other source of noise, etc. such as e.g. the number of machines and other adjacent machining operations. In
addition, the permissible immission level may differ from country to country. This information is nevertheless
suitable for providing the machine user with an improved assessment of the hazard and risk.

2.5 Vibration specifications

The typical hand-arm vibration is 5.1 m/s

2.6 Scope of supply

Single-phase chain mortiser LS 103 Ec complete with:
1 guide rail, cpl.
1 mortising chain
1 chain wheel
1 crossfeed stop
2 operating tools
1 operating manual
1 folder "Safety Instructions"

2.7 Use according to intended purpose

The single-phase chain mortiser is exclusively
intended for mortising solid wood using mortising
chains. The dimensions of the mortising chain sets
used (guide rail, mortising chain and chain wheel)
Sound power level
108 dB (A)
108 dB (A)
2 .
Workplace-related emission value
97 dB (A)
97 dB (A)
must correspond to the mortising chain sets listed in
the operating instructions.
Any other use than described above is not
permissible. The manufacturer cannot be held liable
for any damage arising from such other use.
-16-
230 V~, 50 Hz 120 V~, 60 Hz
2500 W
13 A 20 A
4050 rpm
100 mm (3 15/16 in.)
150 mm (5 7/8 in.)
8,7 kg (19.18 lbs)
4.6 kg (10.1 lbs)