General Information; Versions Of The Centrifugal Pump; Identification Label - battioni Pagani ELBA Serie Bedienungsanleitung

Instruction manual
for use and maintenance of series ELBA
VERSION
ELBA 3500 WITH MECHANICAL SEAL RATIO 1:3
ELBA 3500 WITH MECHANICAL SEAL RATIO 1:4
ELBA 3500 WITH PREFORMED ROPE RATIO 1:3
ELBA 3500 WITH PREFORMED ROPE RATIO 1:4
ELBA 6500 WITH MECHANICAL SEAL RATIO 1:3
ELBA 6500 WITH MECHANICAL SEAL RATIO 1:4
- NOT AVAILABLE O AVAILABLE

1 - VERSIONS OF THE CENTRIFUGAL PUMP

Elba is a centrifugal pump is used for the handling of sewage and liquids in general. It is used in sewage suction and
continuous discharge systems.
VERSIONS
ELBA 3500 1:3
PTO
1"3/8 - Z6 ISO 500
MAX capacity with jet
with ø 34 mm nozzle
ELBA 3500
ELBA 6500
Table 1

1.1 IDENTIFICATION LABEL

Each pump is supplied with an identification label, indicating:
- model of centrifugal pump
- serial number
- production year
- max relative pressure
- max vacuum
- max absorbed power
- max r.p.m.
- max rate of flow
- weight of pump
Each identification plate is protected by a special film, to remove after painting.
This film has been introduced to guarantee the tracing of the pump for warranty purposes.
page 20

GENERAL INFORMATION

ELBA 3500 1:4 ELBA 6500 1:3
PTO PTO
1"3/8 - Z6 ISO 500 1"3/8 - Z6 ISO 500
l/min
1600
2100
CENTR. CENTR.
STANDARD Ø 140
O -
O -
O -
O -
O O
O O
ELBA 6500 1:4
PTO
1"3/8 - Z6 ISO 500
Working rate
Head
max rpm
m
1:3 1:4
750 540 38
750 540 70
Setting the pace since 1953
CHOPPER
VERSION HD
O -
O -
O -
O -
O O
O O
Power at max
vacuum kW (HP)
24 (32,2)
60 (80,4)
IDENTIFICATION PLATE
WITH PROTECTIVE FILM FOR PAINTING
FLAT
FLANGE
-
-
-
-
O
O
Weight kg
59
90