Bosch Kiox BUI330 Originalbetriebsanleitung Seite 12

English – 6​
Displays and settings of the on-
board computer
Please note: All screenshots showing the display and text
on the following pages are from the approved software ver-
sion. The display and/or text may change slightly following a
software update.
Operating logic
You can use the < (10) and > (8) buttons to switch between
the different riding value information pages (even while rid-
ing). This way, you can keep both hands on the handlebars
while cycling.
You can use the + (12) and – (11) buttons to increase or de-
crease the assistance level. If you are in a list (e.g. the <Set-
tings> menu), you can use these buttons to scroll up or
down in the list.
The <Settings> that can be accessed via the status page
cannot be changed while riding.
You can use the select button (9) to perform the following
functions:
– You can access the quick menu while riding.
– You can access the settings menu from the status page
while stationary.
– You can confirm values and acknowledge informative
hints.
– You can exit a dialogue.
If the on-board computer is removed from its holder and not
switched off, it will display information regarding the last
journey, as well as status information, on a loop.
If no button is pressed after the on-board computer is re-
moved from the holder, it will switch itself off after one
minute.
Order of pages
Provided the on-board computer is fitted to the holder, you
can view the following displays one after the other:
1. Start page
2. Time and range
3. Distance and journey time
4. Power and cadence
5. Average and maximum speed
6. Distance, range, power and heart rate
7. Heart rate
8. Calories burnt and total distance
9. Status page
Start page
When you insert the on-board computer into the holder
while it is switched on, it will display the start page.
1 270 020 XBK | (12.03.2019)
b
c
d
a
k e
j
i
24,
3
f
h
g
a Time/speed indicator
b Assistance level indicator
c Lighting indicator
d Battery charge indicator of the eBike battery
e Unit of speed indicator A)
f Speed
g Navigation bar
h Motor output
i Your performance
j Average speed
k Performance evaluation
A) Can be changed via the <Settings> status page.
The a and d indicators form the status bar and are shown on
every page. If the speed is already being displayed on the
screen itself, the a indicator will change to the current time
in hours and minutes. The status bar displays:
– Speed/time: The current speed in km/h or mph or the
current time
– Assistance level: Indicates the current level of assistance
using a colour code
– Light: A symbol that indicates whether the light is on
– eBike battery state of charge: Indicates the current
state of charge as a percentage
The performance evaluation k graphically displays your cur-
rent speed (white bar) in comparison to your average
speed j. The graphic shows you whether your current speed
is faster or slower than your average speed (left of the black
line = lower than average value; right of the black line =
higher than average value).
The navigation bar g indicates which page you are on. Your
current page is highlighted. You can use the (10) < and
(8) > buttons to go to different pages.
From the initial start page, you can access the status page
via the < (10) button.
Bosch eBike Systems
Status screen
As well as the status bar, the
status page also shows you
the current time and the
state of charge of all your
eBike's batteries, as well as
the state of charge of your
smartphone battery if the
smartphone is connected via
Bluetooth®.
It may also display symbols
to indicate an activated
Bluetooth® function or a
device connected via
Bluetooth® (e.g. a heart-rate
monitor). You will also be
shown the date of the most
recent synchronisation
between the smartphone and
Kiox.
You can access the <Set-
tings> from the bottom sec-
tion.
<Settings>
You can access the settings menu via the status page. The
<Settings> cannot be accessed or changed while riding.
You can use the – (11) and + (12) buttons to select the set-
ting you want. You can open the settings, as well as any addi-
tional submenus, using the select button (9). You can use
the < button (10) to go back to the previous menu from any
settings menu.
You can find the following superordinate sections on the first
navigation level:
– <Registration> – Information about registration:
This menu item is only displayed if you have not yet re-
gistered with eBike Connect.
– <My eBike> – Settings for your eBike
You can reset the counters (such as the number of kilo-
metres travelled that day or average values) to zero either
automatically or manually, and you can reset the range.
You can change the wheel circumference value that was
preset by the manufacturer by ±5 %. If your eBike fea-
tures eShift, you can also configure your eShift system
here. The bicycle manufacturer or dealer may base the
service date on the distance travelled and/or a period of
time. The due date for the service is displayed under
<Next Service: [DD. Mon. YYYY] or at [xxxxx] [km]>.
The bike component page displays the serial number and
hardware and software versions for each component in
addition to other key data which is relevant for the com-
ponents.
– <My profile> – Active user data
– <Bluetooth> – Switching the Bluetooth® function on or
off:
Connected devices are displayed.
Bosch eBike Systems
English – ​ 7
– <Sys settings> – A list of setting options for your on-
board computer
You can display the speed and distance in kilometres or
miles, display the clock in 12- or 24-hour format, adjust
the time, date and time zone and select your preferred
language. You can reset the Kiox to its factory settings,
run a software update (if available) and choose between a
black or white design.
– <Information> – Information about your Kiox
Information on FAQs (frequently asked questions), certi-
fication, contact information, information on licences
You can find a detailed description of each parameter in the
online operating instructions at
www.Bosch-eBike.com/Kiox-manual.
Quick Menu
Selected settings are displayed on the Quick Menu. These
settings can be changed even while riding.
You can access the Quick Menu via the select button (9). It
cannot be accessed from the Status screen.
The following settings can be changed via the Quick Menu:
– <Reset trip data?>
All data on the journey so far is reset to zero.
– <eShift>
You can set the cadence here.
– <eSuspension>
This is where you can set a manufacturer-defined shock
absorption or suspension mode.
1 270 020 XBK | (12.03.2019)