Definitions And Pictograms; Definitions; Pictograms - Tractel dynasafe Mecha 3.2 Installations-, Gebrauchs- Und Wartungsanleitung

8 The load limiter must not be used in a man-
lifting line without first checking the
utilisation factors required to ensure the
safety of persons, and more generally, the
GB
applicable safety regulations for the load
GB
line in which the device will be used.
DE
9 Tractel® shall not be liable for any actions
NL
resulting from use of this device in an
ES
installation configuration not described in
this manual.
IT
PT
10 Tractel® shall not be liable for any actions
GR
resulting from unauthorised modifications
to the device or removal of any parts from
NO
the device.
SE
FI
11 Tractel® shall not be liable from any
actions resulting from any disassembly
DK
operations or repairs performed on the
PL
device without Tractel® authorisation,
RU
especially as concerns replacement of
genuine spare parts by parts from another
source.
12 For definitive removal from service of the
device, the device must be scrapped under
conditions preventing re-use of the device.
All environment protection regulations
must be observed.
13 Before
complementary equipment relaying its
signals on an operating system, the user or
installer must first ensure that an analysis
has been carried out to determine the
specific risks involved in the operating
configuration
appropriate safety measures must be
taken accordingly.
14 The load limiter covered by the manual
satisfies the requirements of the European
regulations and must be verified for
compliance with the regulations of any
other country in which it may be used, prior
to commissioning and use. All applicable
safety regulations must be observed.
2.

Definitions and pictograms

2.1.

Definitions

In this manual, the following terms have the
meaning given below:
6
using this device
implemented,
"Product": Item or equipment described in this
manual and delivered complete in the standard
version, or in its various existing models.
"Installation": All the operations required to
bring the complete product from the state in
which it was delivered into a state of
commissioning
elements for commissioning).
"Supervisor": Individual or party responsible
for the management and safe use of the product
described in the manual.
"Technician": Qualified person familiar with
the product, in charge of the maintenance
operations described and permitted in the
manual.
"Operator": Individual using the product in
accordance with the instructions in this manual
2.2.

Pictograms

ranging
environmental damage.
with
"IMPORTANT": When placed at the
beginning of a paragraph, it indicates
instructions for preventing
failure or damage which would not directly
endanger the life or health of operators or other
individuals and/or which may harm the
and all
environment.
precautions to apply for efficient and ergonomic
installation, use and maintenance.
maintenance manual.
(or connection
"DANGER": When placed at the
beginning of a paragraph, it indicates
instructions for preventing injuries
from minor to fatal
"NB": When placed at the
beginning of a paragraph, it
indicates the
: When placed on the product itself
or a product component, it indicates
the need to read the operating and
to other
and also
product
necessary