Operating The Appliance - Silvercrest SSME 250 A4 Bedienungsanleitung

Operating the appliance

1) Place the base 5 on a clean and level
surface.
2) Select the appropriate blender jug 1/9
for your smoothie:
–
large blender jug 1, for a roughly
600 ml smoothie,
–
small blender jug 9, for a roughly
300 ml smoothie.
3) Add the prepared ingredients to the blender
jug 1/9. Always add liquid ingredients first
and then the more solid ingredients such as
the fruit and/or crushed ice.
CAUTION! MATERIAL DAMAGE!
Never fill the blender jug 1/9 with ingre-
►
dients past the MAX marking! The appliance
will not be able to process the ingredients!
► Always add at least 100 ml of liquid into the
blender jug 1/9 when making a smoothie.
4) Check whether the sealing ring is correctly
seated in the blade holder 4. Place the blade
holder 4 on the blender jug 1/9 so that the
blade 3 extends into the blender jug 1/9,
and screw the blade holder 4 firmly in place.
5) Now place the blade holder 4 and the
attached blender jug 1/9 onto the base 5
so that the arrow on the blade holder 4 is
pointing to the
CAUTION! MATERIAL DAMAGE!
To turn the blade holder 4, always hold only
►
the blade holder 4 and never try to turn the
blender jug 1/9! Otherwise, the blender
jug 1/9 will detach and the ingredients will
spill out!
6) Then turn the blade holder 4 so that the arrow
on the blade holder 4 points to the
on the base 5. The blade holder 4 must
audibly click into place so that it sits firmly on
the base 5.
│ GB │ MT
■ 36
symbol on the base 5.
symbol
NOTE
► The appliance will only start if the blade
holder 4, the blender jug 1/9 and the
base 5 are assembled correctly.
7) Insert the plug into a mains power socket.
8) Set the speed switch 6 to the required speed
and wait until the smoothie has reached the
desired consistency.
9) Set the speed switch 6 to "0".
NOTE
► If the ingredients do not mix properly, it may
be necessary to lift up the appliance and
shake it a little. When doing so, take hold of
the blade holder 4 together with the blender
jug 1/9 and the base 5 so that they do
not come apart.
CAUTION! MATERIAL DAMAGE!
► Do not operate the appliance for longer than
1 minute in one session. The appliance will
overheat! After using for 1 minute, allow the
appliance to cool down completely.
CAUTION! MATERIAL DAMAGE!
To turn the blade holder 4, always hold only
►
the blade holder 4 and never try to turn the
blender jug 1/9! Otherwise, the blender
jug 1/9 will detach and the ingredients will
spill out!
10) When the smoothie is ready, turn the blade
holder 4 until the arrow on the blade holder 4
symbol on the base 5 and
points to the
remove the blade holder 4 with the attached
blender jug 1/9.
11) Turn the blender jug 1/9 over and unscrew
the blade holder 4.
12) Screw the lid 2/8 onto the blender jug
1/9. You can drink the smoothie through the
drinking opening on the lid 2/8.
SSME 250 A4