Before Initial Use - Beem MD-357B Gebrauchsanleitung

EN
WARNING – Danger of Fire
• Do not connect the device along with other consumers (with a high wattage) to a multiple
socket in order to prevent overloading and a possible short circuit (fi re).
• Do not use the device in conjunction with extension cables.
• Do not operate the device in the vicinity of combustible materials. Do not place any com-
bustible materials (e.g. cardboard, paper, wood or plastic) in or on the device.
• Do not cover the device during operation.
NOTICE – Risk of Damage to Material and Property
• Switch off the device and pull the mains plug out of the plug socket if an error occurs during
operation, when there is a power cut or before a thunderstorm. When you pull it out of
the plug socket, always pull on the mains plug and never the mains cable!
• Never pull or carry the base station by the connecting cable.
• Protect the device from other heat sources, naked fl ames, sub-zero temperatures, persis-
tent moisture, wet conditions and impacts.
• Never place any heavy objects on the base station or the connecting cable.
• Use only original accessories from the manufacturer in order to guarantee that there is no
interference that may prevent the device from working and to avoid possible damage.

Before Initial Use

1. Remove all packaging materials and any possible protective fi lms used for protection during
transportation. Never remove the rating plate and any possible warnings.
2. Wipe the device with a clean, damp cloth. Rinse the kettle (8) with a little mild detergent
and clear water.
3. Set up the device and connect it (see the "Setting Up and Connecting the Device" chapter).
4. Before you fi rst use hot water, we recommend that you carry out a trial run to remove any
possible production residues. To do this, follow the instructions in the "Pouring In Water"
and "Use" chapters.
When the device is fi rst used, production-related additives may cause a small amount of
smoke and / or an odour to be produced. This is normal and not a device defect.
5. Repeat this process twice. Do not drink this water!
6. Clean the device and accessories (see the "Cleaning and Care" chapter).
18