Samsung BD-F5500 Bedienungsanleitung Seite 20

PROBLEM
• If the HDMI output is set to a resolution your TV cannot support (for example,
The screen is blank.
1080p), you may not see a picture on your TV.
• Press the @ button (on top panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
• When the factory default settings are restored, all stored user BD data is
deleted.
• Press the @ button (on top panel) for more than 5 seconds with no disc
Forgot password
inside. All settings including the password will revert to the factory settings.
Don't use this unless absolutely necessary.
• When the factory default settings are restored, all stored user BD data is
deleted.
• Make sure that the disc is not dirty or scratched.
The picture is noisy or
• Clean the disc.
distorted
• Check the connection between the TV and the HDMI jack of the player.
No HDMI output.
• Check if your TV supports 576p/480p, 720p, 1080i, or 1080p HDMI input
resolutions.
• If random noise appears on the screen, it means that TV does not support
Abnormal HDMI output
screen. HDCP (High-bandwidth Digital Content Protection).
• Go to the contents and find the section of the user manual that contains the
If you experience other
problems. explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorised service centre.
20
SOLUTION PROBLEM
DLNA function
• DLNAs shows only files corresponding to the Image, Music, and Movie
I can see folders shared
through DLNA, but I cannot categories. Files that do not correspond to these categories are not displayed.
see the files.
• Check if the network is stable.
Video is played intermittently.
• Check if the network cable is properly connected and if the network is
overloaded.
• The IP address under the same subnetwork should be unique. If they are not,
DLNA connection between
Player and PC is unstable. IP interference can cause this phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
BD-LIVE
• Check whether the network connection is working or not by using the
I cannot connect to the BD-
LIVE server. Network Status menu.
• Check whether the USB memory device is connected to the player.
• The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management.
• Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
• If all above fails, contact the contents provider or update the player to the
latest firmware.
• The memory device must have at least 1GB of free space to accommodate
When using the BD-LIVE
service, an error occurs. the BD-LIVE service.
You can check the available size in BD Data Management.
✎ NOTES
` When the factory default settings are restored, all stored user BD data is deleted.
SOLUTION