Contact Samsung; Media Play; Playing A Commercially Recorded Disc; Playing Files On A Usb Device - Samsung BD-F5500 Bedienungsanleitung

By USB
To upgrade by USB, follow these steps:
1. Visit www.samsung.com/bluraysupport.
2. Download the latest USB software
upgrade zip archive to your computer.
3. Unzip the zip archive to your computer.
You should have a single RUF file with
the same name as the zip file.
4. Copy the RUF file to a USB flash drive.
5. Make sure there is no disc in the player,
and then insert the USB flash drive into
the USB port of the player.
6. In the player's menu, go to Settings >
Support > Software Upgrade.
7. Select By USB.
✎ NOTES
` No disc should be in the product when you
upgrade the software using the USB Host jack.
` When the software upgrade is done, check the
software details in the software Upgrade menu.
` Do not turn off the player during the software
upgrade. It may cause the player to malfunction.
` Software upgrades using the USB Host jack
must be performed with a USB flash memory
stick only.
Auto Upgrade Notification
If you have connected the player to your
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software version is
available for the player.
To set Auto Upgrade Notification on, follow
these steps:
16
1. Select Auto Upgrade Notification, and
then press the v button.
2. Use the ▲▼ buttons to select On, and
then press the v button.
If there is a new software version available,
the player notifies you with a popup message.
1. To upgrade the firmware, select Yes
in the Pop-up. The player turns off
automatically, then restarts, and begins
the download. (Never turn the player on
or off manually during an upgrade.)
2. The update progress popup appears.
3. When the update is complete, the player
turns off again automatically.
4. Press the POWER button to turn on the
player.
✎
NOTES
` The update is complete when the player turns
off after restarting. Press the POWER button to
turn on the updated player for your use.
` Never turn the player off or on manually during
the update process.
` Samsung Electronics takes no legal
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during software upgrade.

Contact Samsung

Provides contact information for assistance
with your player.
Terms of Service Agreement
Lets you view the general disclaimer regarding
third party contents and services.
Reset
Returns all settings to their factory defaults
except for the network settings.

Media Play

Playing a Commercially Recorded
Disc
1.
Press the 8 button to open the disc
tray.
2. Place a disc gently into the disc tray
with the disc's label facing up.
3. Press the 8 button to close the disc
tray. Playback starts automatically.

Playing Files on a USB Device

You can play multimedia files located on a
USB storage device.
1. Move to the Home menu.
2. In Stop mode, connect the USB storage
device to the USB port on the front
panel of the player.
The message "Do you want to access
the device?" is displayed.
3. Press the ◄► button to select Yes, and
then press the v button.
4. If the message doesn't appear, press
the RED (A) or BLUE (D) button.
If you do not, go to Step 6.
If you pressed the RED (A) button, go to
Step 5.
If you pressed the BLUE (D) button, go
to Step 5 .
-1
5. Press the ▲▼ buttons to select USB
device, and then press the v button.
Videos Photos Music Settings
No Disc
123
a
App 2 App 3 App 4
a Change Device c Safely Remove USB d View Devices " Enter
123
6. Press the ◄► buttons to select Videos,
Music, or Photos, and then press the
v button. Go to Step 7.
5 . Press the ◄► buttons to select USB
-1
Device, then press the v button.
Disc 123 Settings
App 1 App 2 App 3 App 4
123 d Home " Enter
6 . Press the ▲▼ buttons to select Videos,
-1
Photos or Music, and then press the
v button. Go to Step 7.
7. A screen appears listing the contents
of the device. Depending on how the
contents are arranged, you will see
either folders, individual files, or both.
8. If necessary, use the ▲▼◄►buttons to
select a folder, and then press the v
button.