Setting The Clock - Sony Cyber-shot DSC-TX100 Gebrauchsanleitung

Setting the clock

ON/OFF (Power)
button
1
Lower the lens cover.
The camera is turned on. The power lamp lights up only when the camera
starts up.
• You can also turn on the camera by pressing the ON/OFF (Power)
button.
• It may take time for the power to turn on and allow operation.
2
Select a desired language.
3
Select the desired area following the instructions on the
screen, then touch [NEXT].
4
Set [Daylight Savings] or [Summer Time], [Date & Time
Format] and [Date & Time], then touch [NEXT].
• Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
5
Touch [OK].
6
Select the desired display color and [GPS setting]
(DSC-TX100V), following the instructions on the
screen, then touch [OK].
• The battery pack will run out quickly if you set [GPS setting] to [On].
(DSC-TX100V only)
7
When an [In-Camera Guide] introductory message is
appeared on the screen, touch [OK].
Lens cover
GB
GB
15