Sony Bravia KD-55XD80 Serie Referenz-Anleitung Seite 11

4
AUDIO OUT*
• To listen to the TV's sound through the
connected equipment, press HOME.
Select [Settings] t [Sound] t
[Headphone/Audio out] and then select
the desired item.
USB 1/2,
• Connecting a large USB device may
interfere with other connected devices
beside it.
• When connecting a large USB device,
connect to the USB 1 port.
HDMI IN 1/2/3/4
• If connecting a digital audio system that is
compatible with Audio Return Channel
(ARC) technology, use HDMI IN 3. If not, an
additional connection with DIGITAL AUDIO
OUT (OPTICAL) is necessary.
/ AV 2
• For a composite connection, use the
supplied Analogue Extension Cable*
 (RF input),
(Satellite input)
• Connections for terrestrial/cable and
satellite. Connection steps: SUB. t
Antenna t MAIN
• For SUB. jack, connect only when you are
using twin tuner mode except for Single
Cable Distribution EN50494.
/
AV 1
• Connect with a SCART cable. When you
connect an analogue decoder, the TV
tuner outputs scrambled signals to the
decoder, and the decoder unscrambles
the signals before outputting them.

CAM (Conditional Access Module)
• Provides access to pay TV services. For
details, refer to the instruction manual
supplied with your CAM.
• Do not insert the smart card directly into
the TV CAM slot. It must be fitted into the
Conditional Access Module provided by
your authorised dealer.
• CAM is not supported in some countries/
areas. Check with your authorised dealer.
• A CAM message may appear when you
switch to a digital programme after using
the Internet video.
/
USB 3 (HDD REC)*
5
.
*1
< 12 mm
< 21 mm
*2
5
3.5 mm
1
1: L
2: Video
3: Ground
4: R
*3
< 14 mm
*4 Supports 3-pole stereo mini jack only.
*5 Only on limited region/country/TV model.
2 3 4
GB
11
GB