BORETTI BERNINI BIANCO Benutzerhandbuch Seite 93

Trinn 9
Position the complete burner unit on top of the frame. (CAREFUL: the door must be
positioned at the back) Screw both parts together using four M6x25 screws.
Trinn 10 - a) On the left side you will find 4 screws fastened to the frame. Loosen
these screws partway.
b) Now assemble the left side table by sliding this over the four screws
and tightening the screws again securely afterwards.
172
Trinn 11 - a) Løsne de fire skruene som er skrudd inn i den høyre siden av rammen.
b) Slide the right side table (with burner) over the four screws and tighten
the screws again.
Trinn 12
Ta ut sidebrennerfoten, og løsne to bolter for å fjerne sidebrenneren.
173