BORETTI BERNINI BIANCO Benutzerhandbuch Seite 10

Step 15 - a) Connect the plugs of the spark igniter (2.8mm wide) to the spark
generator.
b) Connect the wiring of the micro switch to the 4.8mm wide connection
of the spark generator.
Step 16
Remove the top of the transformer (turn to the left), place the AA battery (supplied)
and fasten the top again securely.
18
Step 17
Place the grease collection tray as shown in the image.
Step 18
Place the warming rack in the position that has been indicated.
19