Running The Initial Setup; Using The Tv Controller - Samsung 4 Serie Bedienungsanleitung

04 Running the Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. The Initial Setup allows you
to configure the basic settings for the TV to operate, such as broadcast reception, channel search, and network
connection, at one time.
• Before starting the Initial Setup, be sure to connect external devices first.
• To use the TV's smart features, the TV must be connected to the Internet.
• Noise may occur temporarily when the TV communicates with mobile devices.
• The SmartThings app is available on mobile devices for Android 6.0 or higher and iOS 10 or higher.
• To perform initialisation by using the SmartThings app, the mobile device must have been connected via
Wi-Fi.
• When the pop-up for setup does not appear automatically on the SmartThings app of your mobile
device, proceed with the process after manually adding the TV using Add Device on the dashboard of the
SmartThings app.
You can also start the Initial Setup using the TV's menu (
Follow the instructions displayed on the Initial Setup screen and configure the TV's basic settings to suit your
viewing environment.

Using the TV Controller

You can use the TV Controller on the back of the TV instead of the remote control to control most of the
functions of your TV. While watching TV or cable TV, you can change the channel or adjust the volume by
pressing the TV Controller button. When using Smart Hub, the TV's menu, or selecting a source, move the TV
Controller up, down, left, or right to move the cursor. Press the TV Controller button to select or activate the
item highlighted by the cursor.
– The image on your TV may differ from the image above depending on the model and geographical area.
English - 12
> Settings > General > Start Setup).
Control menu
: Opens Smart Hub.
: Opens the menu.
: Selects a source.
: Turns off the TV.
TV Controller button
The TV Controller button is
located on the lower left corner
of the back of the TV.
w/v: Changes the volume.
</>: Changes the channel.