12
SAFETY GUIDELINES
12.1 Proper usage
Holzmann Maschinen cannot be held responsible for any injuries or damages if there was per-
formed manipulation or adjustments to the machine.
For another usage and resulting damages or injuries HOLZMANN MASCHINEN doesn't
assume any responsibility or guarantees.
12.2 Incorrect usage
Operation of the machine that doesn't agree with this manual is forbidden!
Operation without the safety devices is not allowed.
You mustn't remove the safety devices!
Incorrect is the usage for materials which aren't mentioned in this manual.
Changes of the machine's construction are forbidden.
For another usage and resulting damages or injuries HOLZMANN MASCHINEN doesn't
assume any responsibility or guarantees.
12.3 Safety instructions
Warning labels and/or other labels on the machine must be replaced when they were removed.
HOLZMANN Maschinen GmbH
Downloaded from
www.Manualslib.com
Do not operate the machine at insufficient lighting conditions.
Do not operate the machine outdoors.
Do not operate the machine when you are tired, when your concentration is impaired,
and/ or under the influence of drugs, medication or alcohol.
Climbing onto the machine is forbidden! Heavy injuries by falling down or by tilting of
the machine are possible.
The machine shall be used only by trained persons.
Non authorized persons, especially children, shall be kept away from the work area.
Do not wear loose clothing, long hair openly or loose jewellery like
necklaces etc. when operating the machine
They might be catched by rotating parts and cause serious injuries.
Use proper safety clothing and devices when operating the machine (, safety goggles,
ear protectors, safety shoes ...)! Do not wear safety gloves for operating because
they decrease the working accuracy and they might be pulled into the saw blade.
Before any maintenance you have to disconnect the panel saw from the power
source. Never use the plugged cable for transporting or manipulating the machine.
www.holzmann-maschinen.at
manuals search engine
SAFETY GUIDELINES
Drechselbank / wood turning lathe
Seite 20
D 460FXL