Preventive Measures - DGM IPS-2701WPH Bedienungsanleitung

PREVENTIVE MEASURES

Don't let the display close to water source, such as the bathroom, dishwasher, kitchen,
washing machine, swimming pools or in the humid basement.
* Don't put the monitors on unstable car, chair, table, if display drop down, it will hurt the
user, and is likely to cause damage to the equipment. Place the monitor on car or chair,
please refer to the manufacturers or monitor suppliers Suggestions. If the monitor is
fixed on the wall or the shelf, installation should be confirmed by manufacturers and
strictly according
* Many long and narrow hole in the upper and bottom part of the monitor back cover is
ventilation holes. To ensure display not overheating under continuous operation, these
cooling holes can't be blocked or covered. So the monitor can't place on bed, sofa, and
blankets or on similar surface, also can't close to heat source and radiation material
while in operation. Unless ventilation is guaranteed, monitor cannot be put in the
bookcase or the box.
* Refer to manual page 4 for the standard operation voltage supply range. If you can't
confirm the supply voltage, you can insult reseller or the local power company.
* This monitor equipped with a three-wire grounding plug, one end grounded. For safety,
the plug should be inserted into the ground power outlet. If you can't insert the plug
three-phase socket, please find electrician to install a correct electrical outlet, or use
adapter to ground the equipment safely. Don't change the safety function of grounding
plug.
* When display is not used of a long period, please cut off power supply. Such action can
prevent power shock or abnormal power voltage on thunderstorm day.
* Do not let the socket overload, otherwise it will cause fire or shock.
Don't put any foreign material in machines, it may cause short circuit and lead to fire or
shock.
* Don't open the shell to prevent harm of shock or other risk. If there is any failure of the
operation, please contact directly with the after-sale service personnel.
* To ensure safety work, please ensure that the power supply voltage range 100 ~ 240V
AC current is at least 6 A.
* Please insert power cord of the display to the nearest outlet.
to the installation steps.
3
ENGLISH