Abus TV7602 Installationsanleitung Seite 52

Downloaded from www.Manualslib.com
2. DOME SET – RECOVER
This feature allows the dome to activate the last specified operation (auto scan, group
tour, preset, pattern or sectors) after a programmed time of inactivity or restart after
power shut down.
The procedure is as following: define any operation and then go to DOME SET and
change RECOVER to any value. Recover time can be programmed from 15 second to
99 seconds and the default setting is OFF.
3. DOME SET - MANUAL SPEED
Manual Speed of Pan/Tilt is selectable from 100°/sec up to 200°/sec.
The default setting is 150°/sec.
4. DOME SET - AUTO FLIP
Auto Flip is available. Move joystick rightwards or leftwards for selecting ON or OFF.
The default setting is OFF. This feature also can be enabled with 67 + preset button.
5. DOME SET – ZOOM SPEED
Zoom speed is selectable between FAST or SLOW mode. Move joystick to the right
direction for selecting FAST or SLOW. The default setting is FAST.
6. DOME SET – ALARM
All alarms inputs are available after set is ENABLE. Move joystick to the right or left
direction to select ENABLE/DISABLE. The default setting is DISABLE and this feature
can also be enabled with 97 + PRESET button.
7. DOME SET – LANGUAGE
Several languages are available: German, English, French, Dutch and Danish. Move
joystick rightwards or leftwards to select language. The default setting is GERMAN.
DOME SET
SYSTEM LOCK:
[PASS WORD]
[OSD DISPLAY]
[SYSTEM STATUS]
[INITIALIZATION]
[PREVIOUS PAGE]
8. DOME SET – [NEXT PAGE] – SYSTEM LOCK
Password protection helps to keep stored settings. It prevents changes by anybody
without password. In order to enter [PASSWORD] page, system lock status must be
ON. Move joystick to rightwards or leftwards to select ON. The default setting is OFF.
manuals search engine
OFF
52
DEFAULT SETTING