User Information - ABL eMH3 Bedienungsanleitung/Sicherheitshinweise

22
| Wallbox eMH3 – User information
ƒ Do not install this device in close vicinity to running water, water jets or areas subject to flooding.
ƒ The product must not be installed in explosive atmosphere areas (EX areas).
ƒ Electrical installation must be carried out with reference to local rules by a qualified electrician, who,
on the basis of their specialist training and experience, as well as their knowledge of the relevant
regulations, can assess and carry out the working steps described in this manual and recognise
potential hazards.
NOTE
Duty to Notify
Please note that electrical grid operators, energy suppliers or national regulations may require notifica-
tion of or approval for the installation or operation of a charging station.
ƒ Ensure that the rated voltage and rated current of the product comply with the parameters of your
local electricity grid and that the rated output is not exceeded during operation.
ƒ The product must only be operated after final approval by a qualified specialist electrical contractor.
ƒ The product must not be covered with stickers or other objects or materials.
ƒ No liquids or receptacles containing liquids must be placed on the product.
ƒ Please note that operating a radio transmitter in the immediate vicinity (< 20 cm) of the product may
lead to malfunctions.
ƒ This product is not intended to be used by persons (including children) with limited physical, sensory
or mental abilities or lack of experience and/or knowledge, unless they are supervised by someone
responsible for their safety or they have received instructions on how to use the product.
ƒ Children must be supervised so that they do not play with the product.
ƒ Do not under any circumstances make alterations to the product. Any violation of this instruction
constitutes a safety risk, fundamentally breaches the guarantee provisions and may void the warranty
with immediate effect.
ƒ Malfunctions affecting the safety of persons, connected electric devices or the device itself must be
resolved by a qualified specialist electrical contractor.
ƒ Should one of the following malfunctions occur, please contact your electrician:
y The product housing has been damaged mechanically, or the housing cover has been removed or
can no longer be closed.
y The product does not function properly.
y The charging socket, the fixed charging cable or its charging coupler is visibly damaged or no
longer functions correctly.

User information

ƒ Local safety regulations regarding the operation of electrical devices for the country in which you
operate the product always apply.
ƒ To disconnect the product completely from the electricity grid, the power supply must be interrupted
using the upstream safety switches and fault current protection devices in the domestic power
distribution.