Thermopatch HS-21-SQR Penguin Anleitung Seite 24

6.1 Cap screw
6.2 Press arm cover
6.3 Harness, low voltage
6.4 Base cover
6.5 Panel sticker
6.6 Power inlet
6.7 Harness, 230 Volt
6.8 Electronics
6.9 Teflon self adhesive cover
M5 x 10
Not on drawing
120 x 120 mm
10 ISO 7380
1 SPAPEN-21020
1 SPAPEN-21603
1 SPAPEN-029
1 SPAPEN-21029
1 SPAPEN-03-13
1 SPAPEN-21607
1
1 SPAPEN-21316
24