ResMed S9 Serie Klinisches Handbuch Seite 20

Clinical setup menu parameters
Parameter
Settings
Circuit
Mask type 9 9 9 9 9 9 9 9 9 9 9 Full Face / Nasal /
Tube type 9 9 9 9 9 9 9 9 9 9 9 SlimLine /
AB filter 9 9 9 9 9 9 9 9 9 9 9 No / Yes
Ext. 9 9 9 9 9 9 9 9 9 9 9 No / Yes
humidifier
Therapy
Mode 9 9 9 9 9 9 9 9 9 9 9 CPAP / S / ST /
Set pressure 9
EPR Level
9 9 9
Response**
Height
*Default settings may differ from country to country
** Not all products are available in all regions
16
Modes
9
*
Range
Pillows / Nasal
Ultra / Pediatric
Default: Full Face
Standard / 3 m
Default: Standard
Default: No
Default: No
T / PAC / iVAPS /
ASVAuto / ASV /
AutoSet / AutoSet
for Her / VAuto
Default: CPAP
4–20 cm H
Default: 4 cm H
Off / 1 / 2 / 3
Default: 3
Standard / Soft
Default: Standard
44-100 inches
9
(110–250 cm)
Default: 70 inches
(175 cm)
Description
Selects the type of mask
used by the patient.
Shows the type of air tubing
used by the patient.
Not displayed if ClimateLine
or ClimateLine
connected.
Enables or disables
antibacterial filter.
Not displayed if H5i is
connected.
Enables or disables an
external humidifier.
Sets the therapy mode
available on the device.
O Sets the fixed treatment
2
pressure.
O
2
Sets the EPR value.
For patients who are
sensitive to faster changes
in pressure during therapy,
AutoSet Response can be
set to either Standard or
Soft. If set to Soft, patients
will receive gentler pressure
rises during therapy.
Body height needed for the
dead space determination.
is
MAX