Elbow [13] With Locking Device - Maico MDR EC Serie Montage- Und Betriebsanleitung

MDR .. EC
2. Apply suitable insulation and sealing
material to the roof socket on the contact
surface to the MDR unit.
3. Carefully place the MDR unit on the roof
socket. NOTICE: Ensure seal integrity. For
MDR-PG variants, ensure free intake with
the two tubes [5] and [20] – do not kink the
tubes.
4. Screw the MDR roof flashing to the roof
socket (Fig. B, position [X]). Provide suitable
mounting material (4 screws, tightening
torque 20 Nm).
5. Proceed as described in Chapter 9.2, steps
8 to 10.

10 Elbow [13] with locking device

Recommendation: For cable cross-sections
of 1.5 to 2.5 mm², pull the empty conduit
from the elbow (inner diameter max. 12 mm).
Guide the connecting cable first through the
empty conduit and then through the elbow
into the terminal compartment.
FIG
DE
UK
VENTILATOREN
FR