Otto Miami Aufbauanleitung Seite 13

IMPORTANT: PLEASE KEEP THIS DOCUMENT FOR LATER
Indented use
- This article is a Overheadshower-Set for showering.
- This product is intended for use in private spheres only.
Safety instructions
- CAUTION DAMAGE BY WATER!
Prior to installation please turn the general water supply off.
- Ensure that all gaskets have the correct fit.
- These taps are not suitable for use on low pressure and small electrical storage heaters.
- We recommend the installation of a filter into the appliance or at least the use of angle valves with filter, in
order to avoid the inflow of foreign matter, which could damage the cartridge.
- This tap is only intended for use in private households! Only suitable for use in rooms with a temperature
over 0 °C, when there is danger of frost, sut off the water supply and empty the tap.
- Take care when adjusting the warm water. Danger of scalding!
- Please ensure that no caustic or corrosive products such as detergents or household cleaning products
make contact with the connection hoses; this can lead to water damages..
- Choking hazard / danger of injury! Do not let children play with the packaging.
They might suffocate by the wrapping or injure themselves with the packaging cover.
- Make sure that children do not take small parts such as nuts, cover caps or the like into their mouths. They
could swallow these and choke on them.
- Risk of damage! Please read the assembly instructions very carefully prior to assembling and check the
product for possible transportation damage. Be careful during the product's assembly.
- The product must only be installed by competent persons. The assembly is recommended to be conducted
by two people.
- Danger of injury! During the assembly, please consider that some parts have sharp edges.
- Fix product to suitable and solid walls only.
- Caution: The wall fixture of the article must be carried out by a competent person because it requires
customized plugs.
- Make sure that there are no wires or pipelines in the drilling ranges.
- Check the areas with a metal detector prior to drilling.
- To order spare parts (see part's list), please contact the customer service.
- Installation accessories are not included and need to be purchased from a specialist retailer.
Maintenance instructions
Use a sponge or a soft cloth for cleaning and care. Environmentally friendly and gentle cleaning agents suffice.
By no means use any aggressive liquids or cleaning agents containing solvents. Never use sharp objects, steel
wool, chemicals or sandy scouring agents for cleaning. These lead to surface damage and loss of warranty.
Slight lime deposits are easily removed with some household vinegar.
REFERENCE!READ CAREFULLY!
13