Location Of Controls; Sound Features; Basic Operations - New One AR270 Benutzerhandbuch

LOCATION OF CONTROLS

1. Button: To turn unit on/off; To mute or restore sound
2. MOD/CLK button: To select function mode; To set clock time
3. VOL/SEL knob: volume, select, enter knob
4. skip forward
5. LCD display
6. USB port
7. AUX IN jack
8. TF card slot
9. RES (RESET) button
10. skip backward
11. AMS/P+: Preset stations+; Automatic storing; Search a track

BASIC OPERATIONS

Turn on/off the unit
Press button to turn on the unit. Press and hold this button again to turn off the unit.
Selecting the mode
When the unit is on, press MOD/CLK button repeatedly to select different source mode:
RADIO USB SD AUX IN
Note: USB, SD mode cannot be selected if no such source was plugged in the unit.
Current time display
Long press MOD/CLK button to display the current time when unit is ON.
Adjust time:
1. Press and hold MOD/CLK button to enter into setting mode. The hour digits will flash.
2. Rotate volume knob anti-clockwise and clockwise to adjust the hour value. Press MOD/CLK button
again to confirm the hour value.
3. The minute digits will flash, rotate volume knob anti-clockwise and clockwise to adjust the minute
value. Press MOD/CLK button to confirm.
Noted: It will confirm your setting if no key is pressed within 5 seconds.
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit. To set the
unit to initial status, press RES button on the front panel with a pointed object. When some errors occur
in display, you can also reset the unit, but it will erase the clock setting and some memorized functions.
GB - 3

SOUND FEATURES

Volume adjusting:
To increase or decrease the sound level, rotate VOL/SEL knob clockwise or anti-clockwise.
Muting the sound
When the unit is ON, press to mute the sound. Press again to restore.
Using VOL/SEL knob to select sound feature
Repeatedly press VOL/SEL knob
To select the desired mode for sound setting in the following order: "BAS" (BASS)
"BAL" (Balance) "FAD" (Fader)
LOUD ON/ OFF DX/ LOC STEREO/MONO
After selecting the desired mode, you can adjust the level by rotating the volume knob.
Preset equalizer (EQ)
When you are listening to pop music, classic music or rock music or Flat music, use the equalizer to
adjust the sound quality. Repeatedly press volume knob to select "EQ OFF" and rotate volume knob
to select different equalizer mode in following order: BASS
LOUD RPT INT RDM 12H/24H
Switching Loudness On/off
By this function, you can increase the low frequency, which can improve sound sensitivity.
Noted: Please refer to "LISTENING TO THE RADIO" for others items operation.
LISTENING TO THE RADIO
Selecting band
In tuner mode, repeatedly press AMS/P+ button to select bands in following order: FM1 (P1-P6)
FM2 (P1-P6) FM3 (P1-P6).
Manual / automatic tuning
- Manual Tuning
Press or continuously to select a station downward or upward.
- Automatic Tuning
Long press or button, the radio automatically searches a station upward or downward
respectively and plays when it finds a station.
Scanning and memorizing stations
- By AMS/P+ button
In tuner mode, press and hold AMS/P+ button for 3 seconds to start scanning for stations and store
them automatically in memory. All preset stations are scrolled during few seconds under your selected
band.
- By VOL/SEL button
1. Tune to a station by or .
2. Press and hold VOL/SEL button for 2 seconds until display shows the "S-P1", using the VOL/SEL
to choose the target position.
3. Press VOL/SEL button to confirm the stored station.
4. When you are listening to a station stored, press AMS/P+ button repeatedly to choose the stored
station.
Note: The unit can be stored up to 6 stations for each band.
EQ OFF/ CLASS (CLASSICS)/ ROCK/ POP/ FLAT
12H/24H.
TRE BAL FAD
SONG.
GB - 4
"TRE" (Treble)
EQ