Replacing The Interior Light - hanseatic HEKS8854GE Gebrauchsanleitung

Page EN-20 Care and maintenance
This will accelerate the defrosting pro-
cess.
6. Leave the door open while defrosting
and place a floor cloth in front of the ap-
pliance to catch thaw water which may
come out.
The defrosting time depends on the
thickness of the ice layer. Experience
dictates that it is possible to start clean-
ing after approx. 1 hour.
7. Wipe down the inside with warm water
and washing-up liquid.
When wiping clean, add a few drops of
vinegar to the water to prevent mould
from forming.
8. Only clean the door seals with clean wa-
ter; they are sensitive to oil and fat.
9. Rub everything completely dry, including
the door seals, and allow to air briefly.
10. Return the food to the fridge or freezer.
11. Plug the mains plug back into the socket
and turn the temperature controller to
level '7'.
12. As soon as a temperature of –18 °C has
been reached, turn the temperature con-
troller back to the usual position.

Replacing the interior light

WARNING
Risk of electric shock!
Touching live parts may result in severe
injury or death.
Unplug the mains cable before chang-
■
ing the light bulb.
Only use light bulbs with an output of max.
10 W, 230 volts and an E14 base (ILCOS:
IBB/C-28-220/240-E14-35).
1. Disconnect the mains plug from the sock-
et.
2. Loosen the cover screw with a
cross-headed screwdriver and remove
the cover.
3. Unscrew the bulb from the holder and re-
place with a new one of the same type.
4. Screw the cover back on.
5. Insert the mains plug back into the sock-
et.