Inserting/Changing The Batteries - Bosch GPL 3G Professional Originalbetriebsanleitung

Point laser
Point laser
Max. altitude
Relative air humidity max.
Pollution degree according to IEC 61010-1
Laser class
Laser type
C
6
Divergence
Tripod mount
Batteries
B)
Operating time
Weight according to
EPTA-Procedure 01:2014
Dimensions (length × width × height)
Protection rating
A) The working range may be reduced by unfavourable environmental conditions (e.g. direct sun-
light).
B) At 20–25 °C
C) The values stated presuppose normal to favourable environmental conditions (e.g. no vibration,
no fog, no smoke, no direct sunlight). Extreme fluctuations in temperature can cause deviations
in accuracy.
D) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by
condensation is expected.
The serial number (9) on the type plate is used to clearly identify your measuring tool.
Assembly

Inserting/changing the batteries

It is recommended that you use alkaline manganese batteries to operate the measuring
tool.
If required, turn the magnetic rotating mount (3) to the side so that the battery compart-
ment cover (6) is not obstructed.
Bosch Power Tools
English | 21
GPL 3 G
GPL 5 G
2000 m
90 %
2
500–540 nm, < 1 mW
0.8 mrad (full angle)
1/4"
2 × 1.5 V LR6 (AA)
8 h
0.35 kg
115 × 50 × 113 mm
IP 65
1 609 92A 5MH | (22.10.2020)
D)
2
1