Warnings; Maintenance; Maintenance Table - Dräger X-act 5000 Basic Gebrauchsanweisung

Maintenance

Text/Code Cause
104 Boot loader
communication fault.
105 Motor does not start.
106 Motor does not stop.
107 Motor too slow.
108 Motor too fast.
109 APS sensor out of
range.
110 DPS sensor out of
range.
111 DPS sensor fault
112 Software integrity fault Contact DrägerService.
113 Data integrity fault
114 Volume out of range.
4.2

Warnings

Warnings will be displayed together with the corresponding icon, and
if necessary, together with a written hint.
Possible warnings include:
Mandatory leak test

Activation strokes required

Desorption strokes required

No measurement in explosion-hazard areas

Battery empty

Invalid password

Replace SO filter

3
"PUMPE <5°C/41°F START?"

18
Remedy
Contact DrägerService.
Contact DrägerService.
Contact DrägerService.
Contact DrägerService.
Contact DrägerService.
Contact DrägerService.
Contact DrägerService.
Contact DrägerService.
Contact DrägerService.
Calibrate flow or
contact DrägerService.
5 Maintenance
WARNING
!
To prevent ignition of flammable or combustible atmospheres,
disconnect the power supply before carrying out maintenance
work on the Dräger X-act 5000 Basic.
5.1

Maintenance table

Work to be performed
Calibrate flow.
Have the Dräger X-act 5000 Basic inspected by Dräger.
Change SO filter.
3
1) Or if indicated on the display
X
X
1)
X
Dräger X-act 5000 Basic