Software Upgrade - PeakTech 9021 Bedienungsanleitung

6.12. Software Upgrade

The Software Upgrade function of the PeakTech
data stored on the device as a backup on a USB storage device to transfer the saved data
back to the device or to transfer a new firmware on the device. Connect a USB memory
device and open the "Software Update" menu.
1) Press the blue <(Find)> button to backup the satellite information, satellite list,
channel data and so on.
2) Press the red <(0/22K)> button to display the firmware in the hard drive and press
OK button to upgrade the firmware .
3) Press the green <(H/V)> button to display the channel data in the hard drive and
press OK button to upgrade the channel data.
4) Press the yellow <(AN/DG)> button to display the all data including the firmware
and channel data.
®
9021 can be used to secure the channel
-68-