Haier AC35S2SG1FA Bedienungsanleitung Und Installationshandbuch Seite 5

Keep this manual where the user can easily find it.
WARNING
y Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.
y The appliance must be stored in a room without continuously operating ignition sources (for example: open flames, an operating
gas appliance or an operating electric heater).
y Do not pierce or burn.
y Be aware that refrigerants may not contain an odour.
y If the supply cord is damaged, it must be replaced by the manufacturer,its service agent or similarly qualified persons in order to
avoid a hazard.
y This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given superivision or instruction concering use of the
appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user
maintenance shall not be made by children without supervision.
y The wiring method should be in line with the local wiring standard.
y All the cables shall have got the European authentication certificate. During installation, when the connecting cables break off,
it must be assured that the grouding wire is the last one to be broken off. The explosion-proof breaker of the air conditioner
should be all-pole switch. Distance between its two contacts should not be no less than 3mm. Such means for disconnection
must be incorporated in the wiring.
y Make sure installation is done according to local wiring regulation by professional persons. Make sure ground connection is
correct and reliable.
y A leakage explosion-proof breaker must be installed.
y Do not use a refrigerant other than the one indicated on the outdoor unit(R32) when installing, moving or repairing. Using other
refrigerants may cause trouble or damage to the unit, and personal injury.
y The installation and service of this product shall be carried out by professional personnel, who have been trainedand certified
by national training organizations that areaccredited to teach the relevant national competency standards that may be set in
legislation.
y Mechanical connectors used indoors shall comply with ISO 14903. When mechanicalconnectors are reused indoors, sealing
parts shall be renewed. When flared joints arereused indoors, the flare part shall be re-fabricated.
y This appliance is intended to be used by expert or trained users in shops, in light industry and on farms, or for commercial use
by lay persons .
y Disconnect the appliance from its power source during service and when replacing parts
Read the precautions in
this manual carefully before
operating the unit.
Service indicator; Read
technical manual
3
This appliance is filled with
R32.
Read the operator's manual